This is the 2-gang touch switch in our EU touch range: a square tempered glass plate over a fire-retardant PC body, with a Tuya WiFi module inside and terminals that wire into the mains like any wall switch. Two gangs sit behind the single plate, so one position in the wall controls two lighting circuits instead of one.
It is bought by people fitting out whole spaces rather than single rooms — electrical contractors, system integrators and distributors who need one article that works in a new-build apartment and in a hotel corridor being refurbished. Recurring positions are a shop window and its interior lighting, a bedroom and the wardrobe strip beside it, or corridor and stair lighting sharing one plate.
The practical value of the two-channel version is that it takes a decision out of the installer's day. The same unit accepts a circuit with a neutral wire or a two-wire loop without one, so the van carries a single box for both situations; four panel finishes mean one article covers mixed interiors without a separate order line for every look; and the wiring, load and app behaviour stay consistent across the family.
As a smart switch supplier we keep the pieces a site actually needs in the same box — screws, the capacitor for two-wire circuits and a printed manual — so nobody is left hunting for parts on install day. The sections below cover how the plate looks and feels, the full ratings, the wiring sequence, and what arrives in the carton.
| Product name | Tuya Smart 2CH WIFI EU Touch Switch |
| App | Tuya Smart or Smart Life |
| Switch channel | 2CH |
| Voltage | AC 100V-240V 50/60Hz (wide voltage range for global use) |
| Switch mode | Touch/Mobile phone |
| WiFi standards | IEEE 802.11 b/n/g 2.4G Hz |
| Voice control | Amazon Alexa / Google Assistant |
| Material | Tempered glass panel (scratch-resistant, easy to clean) + Fire-retardant PC back shell |
| Application | Specifically designed for controlling home lamps |
| Rated power | 10-400W/gang INC, 5-200W/Gang LED |
| Wiring compatibility | Supports both neutral wire and non-neutral wire installation(Extra) |
| Control modes | Touch Control, APP Remote Control, Voice Control, Timer Control |
| Operating temperature | -10 °C to +60 °C |
| Humidity | 5%--95% non-condensing |
On the 2-gang touch switch, a tap on either circle is the whole interaction: once for on, again for off, with the blue ring confirming the change. The touch layer is capacitive, so it answers a light press and there is no mechanical button to wear out or to clean around.
In the app each gang appears as its own channel. Name them after the room or the circuit, group both with other Tuya devices, and set schedules or a countdown for each channel separately — a corridor that goes dark at midnight, an entrance lamp that comes on before staff arrive. Control can be shared with another account, which is how a facilities team hands a unit to a new tenant without swapping hardware. After a power cut the Tuya smart switch returns with its last relay state, so a building that loses supply overnight does not come back to every light burning. Alexa and Google Assistant sit on top of that for hands-free use: each gang is seen as its own light, so a command can name the room rather than the switch.
Site work usually falls into a few patterns. In an apartment retrofit one plate replaces a pair of old single switches in the same box, which is why a smart switch supplier can quote a single article instead of two. In a hotel guest room, gang one takes the entrance and ceiling light while gang two runs the bedside circuit, so housekeeping can light the room from the door and a guest can kill the bedside lamp without getting up. In an office or clinic, the two zones follow separate day and night schedules. In a shop, window lighting and interior lighting switch independently, and the manager can check or change both from a phone after closing.
Because both gangs live on one plate, the same pattern holds whether the site is a single flat or a multi-floor building, and nothing sits between the switch and the router.
| Packing detail | Specification |
| What arrives in the box | 2-gang touch switch ×1, screws ×2, capacitor ×1, printed user manual ×1 |
| Capacitor | x1 |
| Switch dimensions | 86 × 86 × 35 mm |
| Individual box size | 10 × 10 × 5 cm |
| Unit weight | 0.21kg |
| Single-unit packing | One Tuya smart switch per printed box, sealed for shelf display or site issue |
| Carton quantity | 50 pcs |
| Carton gross weight | 10.2 kg |
| Carton size | 51 × 22 × 26 cm |
| Manual language | Tell us the language version your market needs when you order so the printed manual matches |
| Carton marking | Neutral cartons or your own branded labels, agreed with our team at order stage under our OEM/ODM service |
| Spare fixings | Extra screws and capacitors can travel with project orders on request, so site teams have replacements at hand |
| Loading plans | A pallet and container loading layout is available on request for warehouse and freight planning |
Compliance paperwork matters as much as the hardware itself. The Tuya-based smart home and smart electrical products we supply carry FCC, CE, UL and RoHS certification, and every order passes 100% quality control before dispatch. Tell us which directive, standard or market your buyers check against, and we will confirm the applicable certificates and third-party test reports for the models you plan to stock — issued per project, never as blanket claims. When a range is updated, we help distributors keep their files current, and we stay with you through replacement and after-sales.
Two separate lighting circuits from a single wall plate. Each gang has its own switched output and its own touch zone, so one position in the box can run, for example, the ceiling lights and the wall lights of the same room. It is also the usual way to serve a smart home light switch position in a guest room or apartment where the entrance and the bedside lights need independent control.
From the household mains, exactly like the smart light switch it replaces. It works on a circuit with a neutral wire and on a two-wire loop without neutral, using the capacitor that comes in the box; nothing else is needed at the wall — no hub and no separate power supply. A qualified electrician should confirm which of the two your site has before ordering.
Yes, once the unit is paired and connected to the network. Open Tuya Smart or Smart Life from anywhere and each gang shows its current state; you can switch either channel, run a schedule, or simply check whether a light was left on. If the site loses internet, the wifi smart switch keeps working locally and the remote view returns with the connection.
Amazon Alexa and Google Assistant. Once the device is linked to your Tuya account, the assistant sees each gang as a separate light, so commands can name the room — 'turn off the corridor lights' — rather than the switch itself.
No, 2.4 GHz only, which is standard for Tuya devices and gives better range through walls. If your router publishes one combined network name, split out the 2.4 GHz band or use that SSID during pairing; the wifi smart switch holds that connection once it is set up.
Yes. Every unit you add lands in the same device list, and you can sort them into rooms, floors or buildings and drive them as groups. That is what makes the plate workable for a landlord or a facilities team running more than one unit.
There is no mechanical button — the smart switch is touch only, which is also why the face stays flat. Local touch control keeps working without a network, so anyone standing at the wall can still switch the lights. App and voice control are the parts that need a connection.
Yes, per gang, in the app. Typical uses are a corridor light that goes off at a fixed hour, an entrance lamp that comes on before staff arrive, or a countdown that switches a light off after a set period. The two channels can run different schedules.
No. This unit switches circuits on and off and does not meter power, so no consumption figure will appear in the app for either gang. It does report whether each gang is on or off, including after a power cut, and that status is what schedules, timers and scenes are built on — enough to cut waste by keeping lights off when a space is empty, but not a substitute for a meter.
If a project needs consumption reporting, measure upstream instead. A metering breaker or a DIN-rail energy meter in the distribution board feeding the lighting circuit gives one verified reading for the whole group of fittings, and it is the reading a landlord, facilities team or energy report can rely on. For tenant billing or sub-metering, settle with the building's electrical designer where those meters sit and who reads them before the lighting layout is fixed.
Plug-in loads are easier: an energy-monitoring socket puts the consumption figure into the same Tuya app as the switch, so lamps, displays and appliances on sockets can be tracked without touching the lighting circuit. During commissioning, electricians normally verify actual load with a clamp meter at the switch drop, which also confirms each gang sits inside its resistive and LED limits.
If your brief includes per-gang or per-room energy data, raise it with our team at quotation stage — it changes what should be specified alongside the switches, and it is better decided before the wall boxes go in than after.
No — each gang makes or breaks the circuit, so lamps are switched rather than dimmed. For a room that needs dimming, plan a dedicated smart dimmer on that circuit; this plate is the right choice for straight on/off lighting, LED or incandescent.
Long-press the touch zone for about 5-10 seconds until the indicator flashes; the unit returns to pairing mode and can be added to the app again. Do this after a router change, or when a plate moves to a new account.
The blue ring around each touch zone shows that gang's state, and the small indicator between the rings shows power and pairing. The backlight can be turned off in the app for bedrooms and hotel rooms where a light on the wall at night is unwelcome.
Yes. The app shares the device with other accounts, so a family member, an office manager or a new tenant can be given access without handing over the main account, and that access can be withdrawn the same way.
Yes. Scenes in the Tuya app group this smart home light switch with other Tuya devices — sensors, cameras, sockets — so one command, or one sensor event, can switch both gangs along with the rest of the room.
It is a smart light switch for indoor, dry locations. A bathroom is acceptable outside the wet zone, but keep it clear of shower splash and do not fit it outdoors or in a damp outbuilding; those positions need a product rated for the environment.
Start at the supply: confirm the circuit is live and the breaker has not tripped. Then long-press to reset and pair again. If the panel still ignores touch, note the model and the batch printed on the carton and speak to our after-sales team — the electronics sit behind a sealed glass plate, so there is nothing to service at the wall.

